Filter results

48090 results

IDE Research Course

This course is required for all PhD candidates at the faculty of IDE. It can be an elective course for PhD candidates from other design faculties. The faculty of IDE has had a special PhD research course for over a decade, because working in this interdisciplinary area brings with it a wide range of opportunities and challenges. We often work across academic communities, and use methods from various backgrounds. Aim of the course The aim of this course is to help you find a position within the field of design research, to learn about the research culture(s) in the IDE field, to get familiar with the wider research community at IDE, and to strengthen your peer network. The course provides an overview of the variety of research approaches in design research. The course focuses on research skills related to the work of the PhD candidates themselves, and on the research spectrum present at IDE. We recommend to take this course during the first year of your PhD project. Course modules The course consists of 10 modules (2-3 hours each). Each module covers a different aspect of the research at IDE and is developed and taught by a pair of senior researchers from IDE. A module contains: an introduction of its topic, basic theory about it, examples from the breadth of IDE research projects, some pointers for further study, an exercise related to the participant's own research GS credits You will get 5 GS credits in the discipline related skills category for attending the IDE Research Course. Attendance of all course modules is necessary to pass the course, so have the attendance list signed for each module. Please note that you have to do all modules within one year time. If it is not possible for you to attend a particular module within a run, you get the opportunity to attend that module in the next run of the course. Participation The course is obligatory for all PhD candidates in the IDE Graduate School who have to participate in the Doctoral Education programme. Each edition of the course has a maximum capacity of 20 participants. PhD candidates who don't have to do Doctoral Education can also participate in the course, but candidates with Doctoral Education obligation will get priority. Brochure All information about the IDE Research Course can be found in this brochure. Click to download. Dates upcoming edition Due to several reasons the IDE Research Course will not be organised in Spring 2024. For more information see IDE PhD community teams. The next edition will take place in Fall 2024.

CAMlab

Computer Aided Modelling / Manufacturing lab The CAMlab houses multiple machines for digital fabrication, which are used for the production of scale models and parts for technical prototypes. We have lasercutters, 3D printers and two CNC-milling machines. All the machines are operated by the staff and assignments are done in collaboration with the student. Lasercutting The lasercutters can cut through plates of wood, paper and some plastics, to a maximum thickness of 6mm. The cutting and engraving pattern is sent by a 2D-CAD drawing. The price for lasercutting is € 30 per hour, and you pay per minute. The time it takes to cut materials depends on the amount of cutting and engraving lines, the type of material and the thickness. Please read the drawing manual or contact the staff for preparing the laserfiles. Please mind: During presentation periods the waiting time for your order can be up to 3 weeks so make sure plan accordingly. An estimation of the current waiting time can be found next to the CAMlab entrance. All the files you need for lasercutting can be found here: Order form Lasertemplate 3D printing The 3D printers are used to make parts that are difficult to produce by hand. In the lab we have two different types of 3D printers, one uses extruded plastic (PLA) and builds up the model using this material. This produces a model that is strong and can be easily adjusted. The other printer uses a type of gypsum powder, and produces a smoother surface but is more fragile and difficult to further process. Keep in mind that for 3D printing you need a closed 3D model without holes or open edges in the geometry. Orderform 3D printing CNC-milling CNC-milling is one of the more difficult techniques, and we kindly ask students to contact us in an early phase of their project. This way we can discuss a detailed plan on how to approach the final result, taking in account materials, level of details and technical drawings. Orderform CNC-milling Orders Please hand in your orders in person between 9:00 and 11:00 at the Camlab. Only use the email if you're unable to come in person. When you hand in your order we will check the file to see if there might be any problems. And we will notify you by email when your order is ready. Bob de Boer + 31 (0) 15 2786540 B.J.deBoer@tudelft.nl BG.Zuid.080 Universal X2-660 and X-660 lasermachines ISEL Flatcom milling machine 3DSYSTEMS ProJet 360 / Dimension Elite Ultimaker 3, Ultimaker 2+, Ultimaker 2 Extended

Delft Conversations: Discussing Gender Diversity, Equity and Inclusion at TPM

Delft Conversations: Discussing Gender Diversity, Equity and Inclusion at TPM 19 March 2024 12:30 till 13:30 - Location: 31 Technology, Policy and Management, Hall A | Add to my calendar When the whole world is silent, even one voice becomes powerful. Malala Yousafzai Join the DEWIS lunch session to discuss career advancement, equal opportunities and working environment within the frame of communication and action at TPM with the Dean of TPM, Aukje Hassoldt. Come and talk discuss with your fellow scientists and teachers what we can do and who to turn to. This meeting is part of a series of meetings that DEWIS is organizing at every faculty. After the faculty of Architecture, Civil Engineering and Geosciences, Mechanical Engineering and Applied Sciences, Technology, Policy and Management is the fifth faculty. Event information Who : All scientific staff from the faculty Technology, Policy and Management (TPM) Where : 31 Technology, Policy and Management, Hall A When : 19 March, 12:30 – 13.30 Lunch is included Registration https://edu.nl/89468 We would love to hear your experiences, suggestions, comments or wishes as an academic and/or teacher working at the faculty of TPM. What can we learn from your experience? How can we use your experience for better policymaking? We want to encourage you to speak your mind to foster conversation in benefit of equal opportunities and an inclusive and safe environment. Many stories matter. Stories have been used to dispossess and to malign. But stories can also be used to empower, and to humanize. Stories can break the dignity of a people. But stories can also repair that broken dignity. Chimamanda Ngozi Adichie

Laurens Valk

Faculty of Mechanical, Maritime and Materials Engineering Laurens obtained his master’s double degree in Mechanical Engineering and in Systems & Control. He chose to conduct research in the area of control theory. Control theory deals with the behaviour of dynamical systems, aiming to develop methods to better understand and control these systems. Laurens generalized, improved and extended an energy-based control concept in the area of so-called passivity-based control. His innovative method enables distributed control design for a large class of applications, such as human‐machine and human‐swarm interaction. For example, using his approach, human operators can cooperate with and control the behaviour of entire swarms in a simple-to-use, intuitive, and safe way, even if the different individual dynamical systems that form the swarm (e.g. flexible robot arms, unmanned aerial vehicles, etc.) would be difficult to control directly by a human operator. Given the outstanding quality of the work and the high potential impact for applications, Laurens already got two papers published. His thesis was rewarded with the highest grade possible (10). On top of his academic excellence, Laurens is also a successful book author. His handbook on Lego Mindstorms is very popular, according to the Amazon Best Sellers Rank the #1 in Children’s Books, Computers & Technology, Hardware & Robotics. “It is impressive how much Laurens has learned about a highly challenging field in a very short time. The success in and dedication to accessible knowledge dissemination demonstrate both his didactic talent and his unpretentious nature.” Graduation committee – Prof. Heike Vallery, Dr Tamas Keviczky Thesis synopsis The research field of distributed control studies networks of interconnected systems, such as water networks or autonomous vehicle networks. In robotics, distributed control is about making multiple robots cooperate, such as to collaboratively lift and transport an object. In practice, many conventional control techniques are not directly applicable to robots with a limited number of actuators, also known as underactuated systems. This thesis presents techniques to enable stable distributed control of underactuated systems. Relying on a principle similar to the conservation of energy, we show that it is possible to stabilize individual underactuated systems, while simultaneously achieving a group objective such as driving or flying in a prescribed formation. The proposed technique is constructive, allowing a wide range of previously found solutions for individual robots to be used in a distributed control framework. The results have applications in industrial robotics as well as in safe human-robot interaction.

Half Height Horizontal

A key solution to grid congestion

On behalf of the TU Delft PowerWeb Institute, researchers Kenneth Brunninx and Simon Tindemans are handing over a Position Paper to the Dutch Parliament on 14 November 2024, with a possible solution to the major grid capacity problems that are increasingly cropping up in the Netherlands. The Netherlands is unlikely to meet the 2030 climate targets, and one of the reasons for this is that large industry cannot switch to electricity fast enough, partly because of increasingly frequent problems around grid capacity and grid congestion. In all likelihood, those problems will actually increase this decade before they can decrease, the researchers argue. The solution offered by the TU Delft PowerWeb Institute researchers is the ‘flexible backstop’. With a flexible backstop, the current capacity of the power grid can be used more efficiently without sacrificing safety or reliability. A flexible backstop is a safety mechanism that automatically and quickly reduces the amount of electricity that an electric unit can draw from the grid (an electric charging station or a heat pump) or deliver (a PV installation). It is a small device connected or built into an electrical unit, such as a charging station or heat pump, that ‘communicates’ with the distribution network operator. In case of extreme stress on the network, the network operator sends a signal to the device to limit the amount of power. Germany recently introduced a similar system with electric charging stations. The backstop would be activated only in periods of acute congestion problems and could help prevent the last resort measure, which is cutting off electricity to users. ‘Upgrading the electricity network remains essential, but in practice it will take years. So there is a need for short-term solutions that can be integrated into long-term planning. We, the members of the TU Delft PowerWeb Institute, call on the government, network operators and regulator to explore the flexible backstop as an additional grid security measure,’ they said. The entire Paper can be read here . Kenneth Brunninx Associate Professor at the Faculty of Engineering, Governance and Management, where he uses quantitative models to evaluate energy policy and market design with the aim of reducing CO2 emissions. Simon Tindemans is Associate Professor in the Intelligent Electrical Power Grids group at Faculty of Electrical Engineering, Mathematics and Computer Science. His research interests include uncertainty and risk management for power grids. TU Delft PowerWeb Institute is a community of researchers who are investigating how to make renewable energy systems reliable, future proof and accessible to everyone.

25 year celebration of formal collaboration between Delft University of Technology and the University of Campinas

On 25 October 2024 we celebrated 25 years of formal collaboration between Delft University of Technology and the University of Campinas. What began as a project to exchange some students in chemical engineering has now grown to a multifaceted and broad academic collaboration which accumulated into 24 joint research projects (>20 M Euro); 16 advanced courses and 15 Doctors with a Dual Degree PhD. Patricia Osseweijer, TU Delft Ambassador Brazil explained, “We are proud to show and reflect on this special day the added value we created resulting from our joint activities. The lessons we learned demonstrate that especially continuity of funds and availability for exchanges has contributed to joint motivation and building trust which created strong relations. This is the foundation for academic creativity and high-level achievements.” The program presented showcases of Dual Degree projects; research activities and education. It discussed the future objectives and new fields of attention and agree on the next steps to maintain and strengthen the foundation of strong relations. Telma Franco, Professor UNICAMP shared that “joint education and research has substantially benefitted the students, we see that back in the jobs they landed in,” while UNICAMP’s Professor Gustavo Paim Valenca confirmed that “we are keen to extend our collaboration to more engineering disciplines to contribute jointly to global challenges” Luuk van der Wielen highlighted that “UNICAMP and TU Delft provide valuable complementary expertise as well as infrastructures to accelerate research and innovation. Especially our joint efforts in public private partnerships brings great assets” To ensure our future activities both University Boards have launched a unique joint program for international academic leadership. This unique 7-month program will accommodate 12 young professors, 6 from each university. The programme began on 4 November 2024 in Delft, The Netherlands.

Christmas lunch

Take part in a festive lunch with MoTiv, TU Delft Studentenraad en TU Delft ESA This holiday season, MoTiv, TU Delft, and the local Delft churches are bringing together homes and students for a special, heartwarming experience, and we would love for you to be part of it! After three successful years, we’re excited to continue this festive tradition, bridging cultures and creating connections. Are you interested in joining a holiday lunch as a guest , along with other international students, in a welcoming Delft-area home? Or perhaps you’d like to open your home as a host , sharing a warm, cultural celebration with students from around the world? This special event will take place from December 23rd to December 31st, between 12:00 and 15:00 . For Guests : If you’d like to participate as a guest, we’ll match you with a local host eager to share their holiday traditions. You’ll enjoy delicious dishes, laughter, and meaningful conversations, creating memories that feel like home, even far from family. Once matched, we’ll connect you with your host so you can coordinate details and meal plans together. Sign up as a guest in this google forms.(https://forms.gle/yLAqE83DcqWGwcKB8) For Hosts : If you’re interested in hosting, this is a wonderful opportunity to welcome students into your home for a memorable meal. By sharing food, stories, and perhaps even a few games, you’ll help make the season brighter for students eager to experience Dutch hospitality and holiday traditions. Sign up as a host in this google forms.( https://forms.gle/bJB5svxJZ1iTSF1c6 ) For any questions, feel free to reach out to us at motiv.connects@gmail.com. For more information, please visit our website at www.motiv.tudelft.nl/christmas-lunch-delft/ . Thank you for making this holiday season unforgettable. We look forward to celebrating with you! Warm regards, MoTiv, TU Delft Student Council, TU Delft ESA - Student Community Team

An interview with Aukje Hassoldt: “You can't solve what you don't discuss”.

DEWIS interviews staff members in different positions about gender diversity and inclusion. For this edition, we talked to Professor Aukje Hassoldt, dean at the Faculty of Technology, Policy and Management (TBM), about the influx and advancement of women into academic positions, parenthood and social safety. Aukje Hassoldt was appointed the dean of TBM on 1 October 2019 and will step down on 1 December 2024 to become dean of the Rotterdam School of Management (RSM) at Erasmus University Rotterdam. Talk about the unwritten rules. You can’t solve what you don’t discuss. We have to start the conversation in a respectful way and learn to understand each other’s points of view. Professor Aukje Hassoldt Left Aukje Hassoldt during the DE&I Week 2023 Even today, parents and teachers sometimes discourage girls and other minority groups from studying physics based on the well-meaning but misguided notion that they should be protected. You studied physics at Vrije Universiteit (VU) Amsterdam. Did this narrative not affect you? Aukje: “It definitely did. I believed the narrative that physics would be difficult. That’s why it wasn’t my first choice, even though I had my heart set on studying physics. While studying econometrics, I discovered that I could handle the maths. When I went on to study physics, I learned that it wasn’t a difficult programme for me.” What can we do now to change the narrative? Aukje: “Last year, Birgit van Driel wrote a riveting column about her studies in the Delta, in which she went over everything she found difficult - and it wasn’t the coursework! Degree programmes are either right for you or not, but secondary school teachers should be vigilant not to inadvertently single out particular subjects as ‘difficult’. That’s what we should try to change. Some people find maths difficult, while others struggle with other subjects. We have to get rid of the idea that some subjects are inherently ‘hard’, for example by paying attention to this in our outreach activities.” You later held various positions at Rijkswaterstaat (Ministry of Infrastructure and Water Management) and the Netherlands Organisation for Applied Scientific Research (TNO). Did you ever feel excluded? And how did you deal with that? Aukje: “I always felt perfectly at home at Rijkswaterstaat and TNO. I was often the youngest, the only woman and the project leader or supervisor, but that’s exactly what interested me. I never felt uncomfortable. Anything but, organisations welcomed me with open arms. The same is true for RIVM and TU Delft.” You served as dean of the faculty of TBM from 1 October 2019 to 1 December 2024, during which time the percentage of female professors at the faculty has stagnated at about 30%. Is that enough? Aukje: “There has been growth, albeit not at as much as I’d hoped. At the TBM faculty, we’ve appointed five new female professors in recent years, but some have also retired, which means the overall percentage has stayed at around 30%. Our percentage of female associate professors (UHD), however, did go from 15% to 32% and our percentage of female assistant professors (UD) from 36% to 50%. The pipeline is fuller than it was before, but we’re not there yet. In the end, we want there to be 50/50 split in all positions.” What can the university/faculty do to help female researchers build a promising academic career? Aukje: “It’s important to take a critical look at issues such as advancement and differences in perception. Our approach consists of our so-called ‘fleet review’, in which a small committee discusses how our staff is developing and who is ready for a next step. We explicitly look at whether everyone is gaining enough leadership experience and honing their leadership skills. We ask each other critical questions, watch out for possible bias and do everything we can to keep the advancement process fair. At the same time, we will still need training courses to become and remain aware of our unconscious biases. We already have diversity training courses for all staff and a course for members of appointment advisory committees, all of which also have a trained bias observer. On top of that, managers are required to attend management skills training courses and we offer feedback training for everyone.” If you had the chance to implement one measure to improve the advancement of women to senior and decision-making positions at the university/faculty level, what would it be? Aukje: “I would love to organise another talk for young women researchers and senior scientists to share experiences about building your career and making conscious choices. I reckon that would be a good way to support them. In my previous jobs, I also found that a good course on conversation skills can be a big help, and I think TU Delft could do more in this regard.” In 2020, you said that your ideal university is one that is friendly, welcoming, challenging and inspiring. Does TU Delft live up to this ideal, or do we still have a way to go? Aukje: “We could be kinder to each other at times. I’d also add ‘safe’ to my criteria, by which I mean social safety: feeling comfortable to speak your mind, provided you do that in a respectful way. People deserve to feel heard and be taken seriously, and a respectful tone is non-negotiable. Of course, that doesn't mean you always get your way, but it's important that we can provide that safety.” What concrete measures has the faculty taken to promote social safety in the workplace? Aukje: “We organise staff lunches where we engage in small-group discussions that have proven to be very informative and valuable, as they help us stay in touch and listen to each other. Having a well-functioning Personnel Committee (faculty sub-committee of the Works Council) is also very important. I’ve found that staff members with a Dutch background are more likely to dare to bring up issues, but the Personnel Committee has now helped give a voice to international staff. Furthermore, contact with the PhD Council (PhD candidates) is very important, as they’re a vulnerable group. Some may feel uncomfortable speaking up about difficult situations, for instance, and may not even reach out to a confidential adviser. For these people, a peer group can be a valuable source of support. Social safety is about how we treat each other on a daily basis, which makes it a joint responsibility of us all. Managers have a special role because they can do a lot to foster an open atmosphere, but it’s still a duty we all share. We have to be respectful, while ensuring that everyone feels comfortable speaking their mind and is taken seriously. The faculty’s 10-point draft plan for social safety also proposes a code of conduct of sorts.” What can department chairs do to create an environment in which women and people from minority groups can grow and develop personally and professionally? Aukje: “The difference between good and not so good management is often in the details. What makes management so difficult is that it requires great precision and subtlety. When you feel a jokey atmosphere evolve, for instance, you have to be able to intervene in a respectful way. Another example is ensuring that everyone gets the opportunity to weigh in, including more introverted people. These are just examples, but there are many ways managers can contribute to a safe and open atmosphere.” Dr. Isabel Torres, co-founder and CEO of Mothers in Science, gave a talk to the DEWIS community in February, in which she highlighted the barriers and prejudices that mothers in STEM face in their careers. How can managers support parents and people with caring responsibilities? What do we need to do? Aukje: “The maternity wall is a real problem. Fatherhood and motherhood are equally important, and young parents need good support. I should add that informal care-givers (i.e. for older parents) also deserve support: these are phases of life that we all have to deal with.” Is the university responsible for changing the notion that you can’t have a family and a career? Aukje: “Absolutely. Universities should treat men and women as equals when it comes to caring responsibilities, nor should we implicitly expect new fathers to continue working as if nothing has changed, like we did in the old days.” What advice would you give women to help them navigate academia and its culture of unwritten rules? Aukje: “Talk about the unwritten rules. You can’t solve what you don’t discuss. We have to start the conversation in a respectful way and learn to understand each other’s points of view.”