Research
Projects
Latest publications
- SI Suddle, Transportation safety and safety of the vicinity in the Netherlands, In 2011 International Conference on Traffic and Transportation Engineering (ICTTE2011) p.99-104, IEEE.
- SI Suddle, ACP Frijters, Veiligheid in het ontwerp- en voorbereidingsproces
- SI Suddle, J Weerheijma, AC van den Berg, A steel tube or a buffer zone for mitigating blast effects of a bleve on a building spanning an underpass, In 13th international symposium on loss prevention and safety promotion in the process industries p.41-48, Technologisch Instituut.
- JH Park, GA van Nederveen, R Beheshti, A Adriaanse, M. de Jonge, Application of process modelling for industrialised bottum-uop production system in the BIM-integrated BC industry: Prototype of parking garage projects in The Netherlands, In eWork and eBusiness in Architecture, Engineering and Construction p.157-166, Taylor & Francis.
- GA van Nederveen, R Beheshti, P Willems, BIM in the Netherlands, a status report, In Building a better world; cib world congress 2010 p.1-5, CIB.
- GA van Nederveen, R Beheshti, Education for sustainable construction : development of knowledge and skills for industrialized, integrated, intelligent contruction, In Industrialised, integrated, intelligent sustainable construction p.77-91, i3CON BSRIA.
- R Geerts, Het restrisico is een dwaallicht, even ongewenst als onnodig bij de verantwoording proepsrisico, In Ruimtelijke Veiligheid en Risicobeleid Volume 1 p.38-50.
- SI Suddle, HAJ de Ridder, Living buildings in land use planning with external safety, In 10th international probabilistic safety assessment & management conference p.1-13, PSAM.
- GA van Nederveen, R Beheshti, W Gielingh, Modelling concepts for BIM, In Handbook of research on building information modelling and construction informatics: concepts and technologies p.1-18, IGI Global Publishing.
- GA van Nederveen, W Gielingh, Modelling the living building life-cycle, In Ework and ebusiness in architecture, engineering and construction p.225-239, Taylor & Francis.
PhD theses
2024
-
Liu, Z., (2024) Bridging circularity and inclusion: rethinking municipal solid waste infrastructure for sustainable urban transitions, 223 p.
-
Shang, Y., (2024) Design Optimization for Railway Transition Zones, 157 p.
2022
-
Demirel, H. C., (2022) Dealing with Uncertainty in Infrastructure Public-Private Partnership Projects, 185 p.
2021
- Leontaris, G., (2021) Decision Making under Uncertainty for Construction Management of Offshore Wind Assets, 136 p.
- Liu, Y., (2021) From Best Practices to Next Practices: Project-based learning in the development of large infrastructure, 216 p.
- Molaei, M., (2021) In Pursuit of Success: Evaluating the Management of Engineering Projects, Cross-Sectoral Analysis of Project Management Efforts
2020
- Visser, J. L., (2020) Creating a New Perspective by Integrating Frames Through Design: An Exploratory Research into the What, Why, and How of Integrated Design, 275 p.
- Hoseini, E., (2020) Learning from our projects: Evaluating and Improving Risk Management of the Flood Protection Program (HWBP), 279 p.
- Van den Boomen, M., (2020) Replacement optimisation for public infrastructure assets: Quantitative optimisation modelling taking typical public infrastructure related features into account, 249 p.
2018
-
Jalali Sohi, A., (2018) Flexibility in project management: Towards improving project performance, 265 p.
2017
- Verlaan, J., (2017) Afschrijven op publieke infrastructuur, 278 p.
- Horikx, M., (2017) A Methodical Approach on Conceptual Structural Design, 364 p.
- Koops, L., (2017) Creating public value: Optimizing cooperation Between public and private Partners in infrastructure Project, 310 p.
Publication by type
Search term: IDM & conference papers
- SI Suddle, Transportation safety and safety of the vicinity in the Netherlands, In 2011 International Conference on Traffic and Transportation Engineering (ICTTE2011) p.99-104, IEEE.
- SI Suddle, ACP Frijters, Veiligheid in het ontwerp- en voorbereidingsproces
- SI Suddle, J Weerheijma, AC van den Berg, A steel tube or a buffer zone for mitigating blast effects of a bleve on a building spanning an underpass, In 13th international symposium on loss prevention and safety promotion in the process industries p.41-48, Technologisch Instituut.
- JH Park, GA van Nederveen, R Beheshti, A Adriaanse, M. de Jonge, Application of process modelling for industrialised bottum-uop production system in the BIM-integrated BC industry: Prototype of parking garage projects in The Netherlands, In eWork and eBusiness in Architecture, Engineering and Construction p.157-166, Taylor & Francis.
- GA van Nederveen, R Beheshti, P Willems, BIM in the Netherlands, a status report, In Building a better world; cib world congress 2010 p.1-5, CIB.
- GA van Nederveen, R Beheshti, Education for sustainable construction : development of knowledge and skills for industrialized, integrated, intelligent contruction, In Industrialised, integrated, intelligent sustainable construction p.77-91, i3CON BSRIA.
- R Geerts, Het restrisico is een dwaallicht, even ongewenst als onnodig bij de verantwoording proepsrisico, In Ruimtelijke Veiligheid en Risicobeleid Volume 1 p.38-50.
- SI Suddle, HAJ de Ridder, Living buildings in land use planning with external safety, In 10th international probabilistic safety assessment & management conference p.1-13, PSAM.
- GA van Nederveen, R Beheshti, W Gielingh, Modelling concepts for BIM, In Handbook of research on building information modelling and construction informatics: concepts and technologies p.1-18, IGI Global Publishing.
- GA van Nederveen, W Gielingh, Modelling the living building life-cycle, In Ework and ebusiness in architecture, engineering and construction p.225-239, Taylor & Francis.
Search term: IDM & article
- SI Suddle, Transportation safety and safety of the vicinity in the Netherlands, In 2011 International Conference on Traffic and Transportation Engineering (ICTTE2011) p.99-104, IEEE.
- SI Suddle, ACP Frijters, Veiligheid in het ontwerp- en voorbereidingsproces
- SI Suddle, J Weerheijma, AC van den Berg, A steel tube or a buffer zone for mitigating blast effects of a bleve on a building spanning an underpass, In 13th international symposium on loss prevention and safety promotion in the process industries p.41-48, Technologisch Instituut.
- JH Park, GA van Nederveen, R Beheshti, A Adriaanse, M. de Jonge, Application of process modelling for industrialised bottum-uop production system in the BIM-integrated BC industry: Prototype of parking garage projects in The Netherlands, In eWork and eBusiness in Architecture, Engineering and Construction p.157-166, Taylor & Francis.
- GA van Nederveen, R Beheshti, P Willems, BIM in the Netherlands, a status report, In Building a better world; cib world congress 2010 p.1-5, CIB.
- GA van Nederveen, R Beheshti, Education for sustainable construction : development of knowledge and skills for industrialized, integrated, intelligent contruction, In Industrialised, integrated, intelligent sustainable construction p.77-91, i3CON BSRIA.
- R Geerts, Het restrisico is een dwaallicht, even ongewenst als onnodig bij de verantwoording proepsrisico, In Ruimtelijke Veiligheid en Risicobeleid Volume 1 p.38-50.
- SI Suddle, HAJ de Ridder, Living buildings in land use planning with external safety, In 10th international probabilistic safety assessment & management conference p.1-13, PSAM.
- GA van Nederveen, R Beheshti, W Gielingh, Modelling concepts for BIM, In Handbook of research on building information modelling and construction informatics: concepts and technologies p.1-18, IGI Global Publishing.
- GA van Nederveen, W Gielingh, Modelling the living building life-cycle, In Ework and ebusiness in architecture, engineering and construction p.225-239, Taylor & Francis.